05.12.2011   Hawaii real property tax

The method in detail of constructing curb and gutter, with this type of form, at Ottawa, Ont., is described in a succeeding section. Here the joints were formed by inserting a partition of 3/8-in. boiler plate every buxton real estate 12 ft., which was withdrawn just previous to finishing up the ... more..

05.12.2011   Findaproperty.com

After the water table had been troweled down and brushed a 1Ч10-in. This board was sustained by small "knee frames" made of three pieces of 1Ч2-in. stuff, one conforming to the slope of the water table and long enough to extend beyond the front of the 2Ч6-in. front board, a second standing plumb ... more..

04.12.2011   Google real estate

0.10 Interest and depreciation of $1,800 plant at 20% per annum 0.09 Train service, 0.03 day work train at $25 0.75 Summary concrete side walls-- Per cu. Materials $3.16 Labor on concrete 0.84 Labor removing timber, etc. 0.95 Train service 0.75 Miscellaneous 0.34 ------- Total $6.04 In the two ... more..

04.12.2011   Free real estate information

gravel and sand-- 2-horse team and driver, 210 days at $3.60 $756.00 $0.183 2-horse team and driver, 4Ѕ days at $4 18.00 0.005 ------- ------ Total $774.00 $0.188 As there were 1.185 cu. of gravel per cubic yard of concrete the free real estate information cost of gravel per cubic yard of ... more..

04.12.2011   Goldfields realty

23,888 3.58 -------- ------ Total $51,308 $7.69 Averaging the work we have 15,491 cu. Four-Track Subway.--On two sections of four-track subway the labor cost of mixing and placing concrete similarly divided was as follows: Section A. Labor mixing $0.97 $0.94 Labor placing 0.96 0.95 Power 0.14 ... more..

04.12.2011   Find property

The derrick and roof arch travelers were then moved into position between the finished walls, and the arch traveler was jacked up and aligned. Skip cars coming from the mixer were run under the derrick traveler, where the skips were lifted by the derrick and set on the platform cars to be run ... more..

03.12.2011   Trademe property

Carpenters did all the framing, and erected it with the help of laborers. All the carrying of the lumber was done by laborers. This reduced the cost of the work, as the laborers' wages amounted to one-third of the whole cost. As soon as the forms were all in place, which was before the mixing of ... more..

03.12.2011   Buxton real estate

For high and long spans a derrick is sometimes needed for the work of placing the centering. On these jobs the concrete was made so wet that with the proper tamping and cutting of the concrete in the forms the surfaces were so smooth that no plastering was needed. ~MOLDING SLABS FOR GIRDER ... more..

02.12.2011   Mackay real estate

They were cast in wooden molds with collapsible sides held together by iron rods. Each mold was mackay real estate provided with six bottoms so that the molded block could be left standing on the bottom to harden while the side pieces were being used for molding another block. The molding was done ... more..

01.12.2011   North iowa realty

Coal at $4 per ton $210 Machinery, tools and cartage 283 Labor 497 ---- Total $990 This gives a cost of $9 per day for pumping. $ 375 17.6 north iowa realty Tools 69 3.3 Labor at $1.75 1,687 79.1 ------ ----- Total $2,131 100.0 Filling 5,711 cu. Earth $1,142 $0.20 Labor including riprapping ... more..

30.11.2011   Zimmerman realty

Lining zimmerman realty girder forms and lining and plumbing column and wall forms is high-class carpenter work and should be directed by competent carpenters. A column or girder which is out of line or plumb not only looks bad but may be required to be removed and corrected by the engineer. The ... more..

(1)  2